METODE BUDIDAYA TAUGE DALAM SMART GREEN HOUSE DENGAN SISTEM PENYIRAMAN OTOMATIS
Abstract
There are many techniques to cultivate mung bean sprout, however the process requires many human involvements which can cause problems, such as forgetting to water the mung bean sprout, cutting the tail which must be cut one by one, finding the ideal location, and detecting water leakage.
In this research, mung bean sprout will be grown with an automatic watering system in a Smart Green House system, which is able to monitor the mung bean sprout using technologies such as light, temperature and humidity sensors to determine the ideal place of cultivation, water level sensor to measure remaining water level in the container, and water sensor to detect water leakage from the planting medium.
Arduino Mega 2560 is used as the microcontroller in this system. The sensors and components used in the system includes Light Dependent Resistor GL5506, Water Sensor Funduino, buzzer, Ultrasonic Ping HC-SR04, Humidity and Temperature Sensor DHT11, potentiometer, servo motor, relay with 12V pump, Knee and Nipple Watering System, and Fogger Head Sprayer.
The system is able to cultivate mung bean sprout with length of 3-5 cm, without losing their color in the process, and can be harvested without tail.
Downloads
Copyright Notice
An author who publishes in the Jurnal FASILKOM (teknologi inFormASi dan ILmu KOMputer) agrees to the following terms:
- Author retains the copyright and grants the journal the right of first publication of the work simultaneously licensed under the Creative Commons Attribution-ShareAlike 4.0 License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal
- Author is able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book) with the acknowledgement of its initial publication in this journal.
- Author is permitted and encouraged to post his/her work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of the published work (See The Effect of Open Access).
Read more about the Creative Commons Attribution-ShareAlike 4.0 Licence here: https://creativecommons.org/licenses/by-sa/4.0/.