Pengaruh Pelapisan Silane Coupling Agent Pada Papan Partikel Kenaf Dan Tandan Kosong Kelapa Sawit

  • Delovita Ginting Universitas Muhammadiyah Riau
Keywords: Composite, Wood, Kenaf, Silane Coupling Agent, Empty Oil Palm Bunch

Abstract

This study reports the effect of coating Silane Coupling Agent (SCA) on composite surfaces. Composites made from composite particulate kenaf fiber and empty oil palm bunches passing 50 mesh sieves using epoxy resin. The particle board compacting process was carried out using a Hydrolic Press compacting machine with a pressure of 20 Bars, holding time 10 minutes in the initial stages, and continued using a Hot Press compacting machine with a pressure of 20 Bars, temperature 150 oC, holding time 15 minutes. The process of treating the Silane Coupling Agent solution on the composite surface is done manually layered on the composite surface. Composites tensile strength were tested referring to ASTM D 638-14impact strenght tested referring ASTM D 256-04,  and Water Absorption using ASTM D 570. Surface examination was made with a Scanning Electron Microscope (SEM). The Silane Coupling Agent (SCA) coating has succeeded in increasing the bond between kenaf fibers,  empty oil palm bunches and epoxy  be effective and in accordance with increasing tensile strength, impact strength and water absorption.

Downloads

Download data is not yet available.
Published
2019-12-13
How to Cite
Ginting, D. (2019). Pengaruh Pelapisan Silane Coupling Agent Pada Papan Partikel Kenaf Dan Tandan Kosong Kelapa Sawit . Photon: Jurnal Sain Dan Kesehatan, 10(1), 55-61. https://doi.org/10.37859/jp.v10i1.1658
Section
Physics Sciences
Abstract views: 383 , PDF downloads: 259

Most read articles by the same author(s)