Studi Kelayakan Investasi Mesin Stamping dan Usulan Tata Letak Fasilitas Mesin Produksi Spring Seat B
Studi Kasus : PT XYZ
DOI:
https://doi.org/10.37859/jst.v12i1.9423
Abstract
This study evaluates the feasibility of investing in a 63-ton stamping machine to boost Spring Seat B production at PT XYZ, Kampung Logam, Ngingas, Waru. The old machine produced 4,000 units/day, making it difficult to meet targets and requiring overtime. The new machine, costing Rp65,257,000, doubles the capacity to 8,000 units/day. Investment analysis using Payback Period and Break Even Point (BEP) shows a payback in 68 days, with a BEP of 539,916 units. In 2025, total production costs reached Rp1,662,308,586 and revenue was Rp1,867,296,000, resulting in a net profit of Rp204,987,414.08. Layout improvements were also made by relocating the rotary machine closer to the repair tool room to reduce the process distance and improve efficiency.
Downloads
References
Putra MHR, Maslukhah YL. Analisa Kelayakan Investasi Mesin Produksi Sambal Geprek Dapur Aisyah. Jurnal Tecnoscienza. 2021;6(1):119–36.
Maulana W, Putri DLP. Analisis Kelayakan Investasi Sebagai Rencana Penggantian Mesin Dengan Teknik Capital Budgeting (Studi Pada Perusahaan Tegel Beton Dan Sanitair Warna Agung Pamekasan). Jurnal Ilmu Manajemen METHONOMIX. 2019;2(1):7–18.
Mulyana IS, Yuniardi D, Yulianto ES, Alliandi F, Yudaputranto CJ. Tonase Mesin Stamping Dalam Proses Pembuatan Bracket Engine Front 51422 - Bz071 Di Pt. Nusahadi Citraharmonis. Jurnal Ilmiah Flash. 2023;8(2):66.
La Sudarman, Husriah WOI. Buku Ajar Analisis dan Estimasi Biaya (Teori dan Praktik). 2022. 140 p.
Adnyana IM. Manajemen Investasi dan Protofolio. Melati, editor. Lembaga Penerbitan Universitas Nasional (LPU-UNAS), Jakarta Selatan. Jakarta Selatan; 2020. 1–13 p.
Zainuri. EKONOMI TEKNIK. Vol. 11, CV. Jasa Surya. Padang; 2021. 1–14 p.
Lubis AH (Universitas M. Usulan Perancangan Tata Letak Pabrik Dengan Metode Systematic Layout Planning Di CV. SUKA BERSAMA. 2022;1–50.
I Nyoman Pujawan. Ekonomi Teknik. 3rd ed. Yogyakarta: Lautan Pustaka; 2019.
Halim A. Analisis Kelayakan Investasi Bisnis Kajian dari Aspek keuangan. 1st ed. Yogyakarta: Graha Ilmu; 2009.
Arif M. Perancangan Tata Letak Pabrik. 1st ed. Yogyakarta: Deepublish Publisher; 2017.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2025 Davit Indra Permana, Hery Murnawan
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
