Pengujian Alat Press Hidrolik Kapasitas 20 Ton
DOI:
https://doi.org/10.37859/jst.v10i2.8727
Abstract
A manual hydraulic press is a tool that functions to press or press work objects and this tool is equipped with a pressure measuring device. This research is to determine the parameters of the test results of a 20 ton capacity hydraulic press on different specimens, namely: ST 37 shaft, ST 41 shaft and ST 60 shaft with the same diameter, namely 13 mm. The results of the test, the first test of the ST 37 shaft produced a pressure of 1000 Psi/ 70.307 kg/cm². With a change in diameter of 0.4 mm, the cross-sectional area is 0.00001256 m², and the total pressure force is 195,311 N. The second test on the ST 41 shaft produces a pressure of 1300 Psi/ 91,399 kg/cm². With a change in diameter of 0.3 mm, the cross-sectional area is 0.000007065 m², and the total pressure force is 195.105 N. The third test on the ST 60 shaft produces a pressure of 1600 Psi/ 112.4911 kg/cm². With a change in diameter of 0.1 mm, the cross-sectional area is 0.000000785 m², and the total pressure force is 194.898 N.
Downloads
References
Suwardi & Daryanto . Pedoman praktis K3LH Keselamatan Kesehatan Kerja dan Lingkungan Hidup. Yogyakarta : Penerbit Gava Media 2018
George, Martin. Kinematics and Dynamics of Machines. Mcgraw-Hill, Ltd, 1982
https://id.wikipedia.org/wiki/hukum_pascal . Dirilis oleh Jimmy Wales dan Larry Sanger pada tahun 2001
Jarwo Puspito. Elemen Mesin Dasar. Yogyakarta 2006
Neiman, Gustav & Budiman, Anton & Bambang Priambodo. “Elemen Mesin Jilid I”. Erlangga : Jakarta, 1986
Hutahaean, Rames Y. Mekanisme dan Dinamika mesin. Penertbit Andi. Yogyakarta. 2010.
Sularso, “Dasar dan Perencanaan Pemilihan Elemen Mesin”, PT. Pradnya Paramita, Jakarta, 1997.
Sularso, Dasar Perencanaan dan Pemilihan Elemen Mesin, Pradnya Paramita, Jakarta, 1983.
Sumantri, “Teori Kerja Bangku”. Departemen Pendidikan dan Kebudayaan Direktorat Jenderal Pendidikan Tinggi Proyek Pengembangan Lembaga Pendidikan. Tenaga Pendidikan, Jakarta: (1989).
Takeshi Sato, G, dan N. Sugiarto Hartanto, “Menggambar Mesin Menurut Standar I.S.O” Pradya Paramitha, Jakarta 1981.
Wiryosumarto, H. & Okumura, Teknologi Pengelasan Logam, Pradnya Paramitha, Jakarta: 2008.
Yue, T.M., Chadwick, G.A., Journal of Material Processing Technology:
https://www.Bukabangunan.com/artikel/pengertian-material-119156 . Pertama kali diindeks oleh google pada july 2022
