Analisis Efektivitas Mesin Heidelberg SM72-FP dalam Upaya Meminimalisir Penyebab Downtime pada Perusahaan Offset Printing
(Studi Kasus Pada CV. Multikarya Esanugrah)
Abstract
This study analyzes the effectiveness of the Heidelberg SM72-FP machine at CV. XYZ to identify and reduce the factors causing downtime that affect productivity. The evaluation was conducted using the Overall Equipment Effectiveness (OEE) method and the Six Big Losses. This analysis also includes the use of Pareto and fishbone diagrams to determine repair priorities and the main causes of time loss. The research results show that the average OEE value before implementation was 73.30%, below the JIPM standard of 85%. The dominant factor causing losses is reduced speed losses (12.63%). After implementing the maintenance strategy by applying the 2 pillars of TPM focused maintenance and autonomous maintenance, the OEE value increased to 75.25%. The proposed strategy includes scheduling preventive maintenance, lubrication, routine checks, and troubleshooting for machine monitoring. With this improvement, the company's productivity showed a significant increase of 1.95%.
Downloads
References
G. Sigit, “PENGUKURAN NILAI OVERALL EQUIPMENT EFFECTIVENESS (OEE) DAN ANALISIS SIX BIG LOSSES Studi Kasus (PT SUNARDI MEKAR JAYA READYMIX YOGYAKARTA),” UNIVERSITAS ISLAM INDONESIA, 2024. [Online]. Available: https://dspace.uii.ac.id/handle/123456789/50062
M. K. Al Farichi and H. Murnawan, “Analisis Pengukuran Efektivitas Mesin Packaging di Unit 2 Menggunakan Overall Equipment Effectiveness (OEE) dengan Pendekatan Cause and Effect Diagram,” J. Tek., vol. 1, no. 1, pp. 66–80, 2023, [Online]. Available: https://jurnal.untag-sby.ac.id/index.php/teknika/article/view/8860
Y. S. T. Siahaan and A. Arvianto, “Analisis Overall Equipment Effectiveness (OEE) pada Pulp Machine dan Six Big Losses di PT Toba Pulp Lestari, Tbk,” Ind. Eng. Online J., vol. 7, no. 4, pp. 343–354, 2019, [Online]. Available: https://ejournal3.undip.ac.id/index.php/ieoj/article/view/23054
S. M. Ayuningtyas, D. Herwanto, S. P. Khan, Z. I. Vindari, A. G. Azzahra, and W. Rohmah, “Analisa Penerapan Total Productive Maintenance Menggunakan Metode Overall Equipment Effectiveness pada Mesin Press Sinohara 55 T di PT. Ciptaunggul Karya Abadi,” J. Serambi Eng., vol. VIII, no. 1, pp. 4306–4316, 2023, doi: 10.32672/jse.v8i1.5526.
M. C. Agustha and Iskandar, “PEMILIHAN STRATEGI PERAWATAN MESIN PRESS FCP-24V MENGGUNAKAN METODE OVERALL EQUIPMENT EFFECTIVENESS DI PT KIA KERAMIK MAS,” J. Tek. Mesin, vol. 11, no. 3, pp. 75–82, 2023, [Online]. Available: https://ejournal.unesa.ac.id/index.php/jtm-unesa/article/view/55796
B. Bakhtiar, S. Syukriah, and ..., “Analisis Overall Equipment Efectiveness (OEE) Dalam Meminimalisir Six Big Losses Pada Mesin Produksi Pengolahan Minyak Kelapa Di UD. Hidup Baru,” Ind. Eng. Journa, vol. 5, no. 2, pp. 52–57, 2016.
M. C. Chuluk, “Analisis Pengukuran Efektivitas Mesin dengan Penerapan Metode Overall Equipment Effectiveness (OEE) Pada Mesin Shrink (Label),” Universitas 17 Agustus 1945 Surabaya, 2021. [Online]. Available: https://scholar.google.co.id/scholar?q=Analisis+Pengukuran+Efektivitas+Mesin+dengan+Penerapan+Metode+Overall+Equipment+Effectiveness+(OEE)+Pada+Mesin+Shrink+(Label)&hl=en&as_sdt=0&as_vis=1&oi=scholart
A. A. Permata, “ANALISIS OVERALL EQUIPMENT EFFECTIVENESS (OEE) PADA PAPER MAKING MACHINE DAN PENDEKATAN 5 WHYS UNTUK PERBAIKAN PADA PT. INDAH KIAT PULP & PAPER PERAWANG (Studi Kasus: PT Indah Kiat Pulp & Paper Perawang),” E-Journal Univ. Diponegoro, 2023, [Online]. Available: https://ejournal3.undip.ac.id/index.php/ieoj/article/view/37447/28451
M. Dipa, F. D. Lestari, M. Faisal, and M. Fauzi, “Analisis Overall Equipment Effectiveness (OEE) Dan Six Big Losses Pada Mesin Washing Vial Di PT. XYZ,” J. Bayesian J. Ilm. Stat. dan Ekon., vol. 2, no. 1, pp. 61–74, 2022, doi: 10.46306/bay.v2i1.29.
B. S. Waluyo, Chriswahyudi, and Restianingsih, “Analisa Perbaikan Produktivitas Menggunakan Metode Overall Equipment Effectiviness (Oee) Pada Mesin Filling Dengan Pendakatan Six Big Losses Untuk Mencari Penyebab Losses Tertinggi Pada Produksi Skincare Studi Kasus Pt Xyz,” J. Tek. Univ. Muhammadiyah Tangerang, vol. 8, no. 1, pp. 90–99, 2019, doi: 10.31000/jt.v8i1.1596.
W. A. Wicaksono and H. Suliantoro, “Analisis Efesiensi Kerja Pada Mesin Pembentuk Pipa Mesin F Menggunakan Metode Oee (Overall Equipment Effectiveness) Untuk Mengetahui Penyebab Gap Yang Terjadi Di Pt Raja Besi Semarang,” Ind. Eng. Online J., vol. 12, no. 1, 2023, [Online]. Available: https://ejournal3.undip.ac.id/index.php/ieoj/article/download/37396/28423
Copyright (c) 2024 Erlina Firdah Lestari, Siti Mundari
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
Abstract views: 102 , 
*.pdf downloads: 78
