Analisis Pengendalian Kualitas Produk Furniture dengan Metode SPC dan FMEA pada PT. Multi Manao Indonesia

Authors

  • Moch Nur Fadhil Universitas 17 Agustus 1945 Surabaya
  • Siti Muhimatul Khoiroh Universitas 17 Agustus 1945 Surabaya

DOI:

https://doi.org/10.37859/jst.v12i1.9387
Keywords: Quality Control, Statistical Process Control (SPC), Product Defects, Failure Mode and Effect Analysis (FMEA)

Abstract

This research addresses the importance of quality control in the furniture industry, particularly in maintaining product consistency and reducing defects. PT. Multi Manao Indonesia, a furniture manufacturing company, faces challenges in quality consistency, especially in the Setting Warna section. This study aims to analyze quality control at PT. Multi Manao Indonesia using the Statistical Process Control (SPC) method, focusing on the Aaron Side Chair product, and further identifying defect causes through Failure Mode and Effect Analysis (FMEA). SPC is used to monitor production process stability and detect variations affecting quality, while FMEA is applied to assess and prioritize potential failure modes. The findings are expected to support the company in improving process control, reducing defects, and enhancing production efficiency.

Downloads

Download data is not yet available.

Author Biographies

Moch Nur Fadhil, Universitas 17 Agustus 1945 Surabaya

Program Studi Teknik Industri

Siti Muhimatul Khoiroh, Universitas 17 Agustus 1945 Surabaya

Program Studi Teknik Industri

References

F. Ahmad, “Six Sigma Dmaic Sebagai Metode Pengendalian Kualitas Produk Kursi Pada Ukm,” Jisi Um, vol. 6, no. 1, p. 7, 2019, [Online]. Available: https://jurnal.umj.ac.id/index.php/jisi/article/view/4061

Y. S. Tjahjaningsih, “Penentuan Prioritas Perbaikan Kegagalan Proses dalam Pengendalian Kualitas dengan Mengintegrasikan FMEA dan Grey Theory,” Semin. Nas. Inov. dan Apl. Teknol. diIndustri, vol. 1, no. 2, p. C.170-C.175, 2016.

M. Basjir and Suhartini, “Analisa Risiko Prioritas Perbaikan Kegagalan Proses Penjernihan Air Dengan Metode Fuzzy FMEA Kebutuhan manusia produksinya . Kegagalan adalah suatu kejadian dimana terjadi kondisi,” Tecnoscienza, vol. 03, no. 02, pp. 196–210, 2019.

D. C. Montgomery, Design and Analysis of Experiments, 8th ed. Gramedia Pustaka Utama, 2017.

S. Permono Nugroho, A. Agus Setyawan, and dan M. Farid Wajdi, “Penyusunan Standarisasi Kualitas Dan Penetapan Harga Jual Bagi Produk Mebel Dan Batik Di Kabupaten Sragen Quality Standardization Preparation and Pricing Products for Sell Furniture and Batik in the District Sragen,” pp. 406–423, 2016.

S. Assauri, Manajemen Produksi dan Operasi Edisi Revisi 2008, vol. 299. Jakarta: Jakarta LP FEUI , 2008, 2008.

H. Sirine, E. P. Kurniawati, S. Pengajar, F. Ekonomika, D. Bisnis, and U. Salatiga, “Pengendalian Kualitas Menggunakan Metode Six Sigma (Studi Kasus pada PT Diras Concept Sukoharjo),” AJIE-Asian J. Innov. Entrep., vol. 02, no. 03, pp. 2477–3824, 2017, [Online]. Available: http://www.dirasfurniture.com

Edi Supriadi, ANALISIS PENGENDALIAN KUALITAS PRODUK DENGAN STATISTICAL PROCESS CONTROL (SPC). Pascal Books, 2022, 2022.

H. & Render, Operations management : sustainability and supply chain management, 1st ed. Jakarta: Gramedia Pustaka Utama, 2009.

H. N, Guidelines for Process Hazards Analysis (PHA, HAZOP), Hazards Identification, and Risk Analysis. CRC Press, 2003.

Downloads

Published

2025-06-30

How to Cite

[1]
M. N. Fadhil and S. M. Khoiroh, “Analisis Pengendalian Kualitas Produk Furniture dengan Metode SPC dan FMEA pada PT. Multi Manao Indonesia”, JST, vol. 12, no. 1, pp. 430–438, Jun. 2025.

Issue

Vol. 12 No. 1 (2025): JURNAL SURYA TEKNIKA

Section

Research Article

License

Copyright (c) 2025 Moch Nur Fadhil, Siti Muhimatul Khoiroh

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.