Rancangan Timbangan Digital dengan Alat Dimensi Otomatis Menggunakan Metode Kano
DOI:
https://doi.org/10.37859/jst.v12i1.9360
Abstract
Supply Chain Management (SCM) is a department of material & service provision at JOB Pertamina – Medco E&P Tomori Sulawesi. Data from each material has been entered into (SAP) such as material type, weight and material dimension size. To find out the dimensions of the incoming material, manual measurements are still carried out. Redesigning the digital bench scale by adding the function of measuring the dimensions of goods so that they can be displayed automatically via a liquid crystal display (LCD). The Kano method classifies the attributes of the digital bench scale by adding the function of measuring the dimensions of goods. From the results of the research on the redesign of the digital bench scale, 5 trials of the designed tool, there was a difference in the distance between manual and automatic measurements of around 0.2-1.5 cm which was caused by the HC-SR04 ultrasonic sensor which was not precise.
Downloads
References
Suryantoro, H. (2019). Prototype Sistem Monitoring Level Air Berbasis Labview dan Arduino sebagai Sarana Pendukung Praktikum Instrumentasi Sistem Kendali. Indonesian Journal of Laboratory, 1(3), 20. https://doi.org/10.22146/ijl.v1i3.48718
Anwari, S. (2017). Perancangan dan Kalibrasi Timbangan Digital. Jurnal Teknik Elektro, ITENAS Bandung, 5(November), 106–118.
Wahyudi, W., Rahman, A., & Nawawi, M. (2018). Perbandingan Nilai Ukur Sensor Load Cell pada Alat Penyortir Buah Otomatis terhadap Timbangan Manual. ELKOMIKA: Jurnal Teknik Energi Elektrik, Telekomunikasi dan Elektronika, 5(2), 207. https://doi.org/10.26760/elkomika.v5i2.207
Irawan, R. B., & Nuruddin, M. (2022). Peningkatan Kualitas Produk Kitchen Set Menggunakan Metode Kano dan Quality Function Deployment (QFD) pada CV. ABC. Jurnal Sains, Teknologi dan Industri, 20(1), 130–137.
Utami, E. (n.d.). Pendekatan Model Kano pada Quality Function Deployment untuk Perbaikan Kualitas Kegiatan Belajar Mengajar.
Ji, P., Jin, J., Wang, T., & Chen, Y. (2014). Quantification and Integration of Kano’s Model into QFD for Optimising Product Design. International Journal of Production Research, 52(21), 6335–6348. https://doi.org/10.1080/00207543.2014.939777
Llinares, C., & Page, A. F. (2011). Kano’s Model in Kansei Engineering to Evaluate Subjective Real Estate Consumer Preferences. International Journal of Industrial Ergonomics, 41(3), 233–246. https://doi.org/10.1016/j.ergon.2011.01.011
Maatita, Y., & Lawalata, V. O. (2017). Penerapan Kano Model dalam Proses Pengambilan Keputusan Penyediaan Fasilitas dan Alternatif Bisnis Rumah Kost (Studi Kasus: Bisnis Rumah Kost di Kawasan Rumah Tiga). Arika, 11(2), 97–108. https://doi.org/10.30598/arika.2017.11.2.97
Sugiyono. (2010). Metode Penelitian Kuantitatif Kualitatif dan R&D. Bandung: Alfabeta.
Anto, R. P., et al. (2024). Metode Penelitian Kualitatif: Teori dan Penerapannya (Vol. 2).
Widodo, S. M., & Sutopo, J. (2018). Metode Customer Satisfaction Index (CSI) untuk Mengetahui Pola Kepuasan Pelanggan pada E-Commerce Model Business to Customer. Jurnal Informatika Upgris, 4(1), 38–45.
Saputro, H. A. (2017). Rancang Bangun Alat Pengukur Tinggi Badan Digital dengan Sensor Ultrasonik HC-SR04 Berbasis Arduino UNO.
Chen, R., Zhai, W., & Qi, Y. (1996). Mechanism and Technique of Friction Control by Applying Electric Voltage. (II) Effects of Applied Voltage on Friction. Mocaxue Xuebao/Tribology, 16(3), 235–238.
Khakim, A. L. (2015). Rancang Bangun Alat Timbang Digital Berbasis AVR Tipe ATMega32 [Daring]. Tersedia pada: http://lib.unnes.ac.id/23438/1/5301411071.pdf
Sitohang, E. P., Mamahit, D. J., & Tulung, N. S. (2018). Rancang Bangun Catu Daya DC Menggunakan Mikrokontroler Atmega 8535. Jurnal Teknik Elektro dan Komputer, 7(2), 135–142.
Sudarmaji, S. (2017). Work System Analysis of Power Supply in Optimizing Electricity on Personal Computer (PC). Turbo: Jurnal Program Studi Teknik Mesin, 6(2), 168–177. https://doi.org/10.24127/trb.v6i2.554
Purwadi, H. N., Dwi, N. D. R., & Sabarguna, B. S. (2020). Perbedaan Pengetahuan dan Sikap Anak Usia Sekolah Sebelum dan Sesudah Diberikan Penyuluhan Kesehatan Melalui Media Video tentang Jajanan Sehat di SD Negeri Pamulang Barat Tahun 2019. Jurnal Medikahutama, 1(2), 71–77. [Daring]. Tersedia pada: https://jurnalmedikahutama.com/index.php/JMH/article/view/25
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2025 Siswanto Siswanto
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
