Penilaian Kinerja dan Efektivitas Mesin Extruder PEX150JA pada Produksi Kabel Medium Voltage (MV) dalam Fase Outer Sheathing di PT Sucaco Tbk
DOI:
https://doi.org/10.37859/jst.v11i2.8299
Abstract
This research evaluates the performance and effectiveness of the PEX150JA extruder machine in the medium voltage cable production process during the outer sheathing phase. The performance was measured using the Overall Equipment Effectiveness (OEE) method, which encompasses Availability, Performance, and Quality rates. Data collected over 12 months revealed an average OEE value of 70%, indicating suboptimal performance compared to the global industry standard of 85%. Contributing factors include component wear and operational inefficiencies. The main findings show that the low OEE is caused by issues with Carbon Brush, Bearing, and Heating System. The practical implications of this research emphasize the necessity of implementing scheduled preventive maintenance to reduce failure frequency. Improvements are proposed based on data analysis and Failure Mode and Effect Analysis (FMEA).
Downloads
References
Cahyani, G. I. (2023). Pengaruh Manajemen Evaluasi Kinerja Karyawan Terhadap Produktivitas Perusahaan. Karimah Tauhid, 2(5), 1708-1713.
Kurnia, H., Jaqin, C., & Purba, H. H. (2022). The PDCA approach with OEE methods for increasing productivity in the garment industry. Jurnal Ilmiah Teknik Industri, 10(1), 57-68.
Monoarfa, M. I., Hariyanto, Y., & Rasyid, A. (2021). Analisis penyebab bottleneck pada aliran produksi briquette charcoal dengan menggunakan diagram fishbone di PT. Saraswati Coconut Product. Jambura Industrial Review (JIREV), 1(1), 15-21.
Saputra, R., & Santoso, D. T. (2021). Analisis Kegagalan Proses Produksi Plastik Pada Mesin Cutting Di PT. FKP Dengan Pendekatan Failure Mode and Effect Analysis Dan Diagram Pareto. Barometer, 6(1), 322-327.
Yuamita, F. (2022). Pengendalian Kualitas Produksi Sarden Mengunakan Metode Failure Mode and Effect Analysis (FMEA) Untuk Meminimumkan Cacat Kaleng Di PT. Maya Food Industries. Jurnal Teknologi dan Manajemen Industri Terapan, 1(I), 1-6.
