Analisis Perfoma Multi Effect Desalination dengan Metode Overall Equipment Effectiveness Sebelum dan Sesudah Perbaikan di PLTU X
DOI:
https://doi.org/10.37859/jst.v11i1.7368
Abstract
A multi-effect desalination machine is a device capable of producing fresh water for power plant and domestic water needs. The problem encountered is a decrease in the fresh water produced, which is related to the effectiveness of the multi-effect desalination machine. The method used to measure the machine's effectiveness is the Overall Equipment Effectiveness method. This study aims to calculate the OEE value of the multi-effect desalination machine before and after maintenance and to identify common issues by determining an action plan. The analytical method used to determine failure defense tasks is the Failure Mode and Effect Analysis method. The results showed that the OEE value after maintenance increased compared to the OEE value before maintenance, with the highest OEE value recorded at 91% on August 31 - September 1, 2023. Of the 12 types of damage that occurred, 66.67% affected the performance rate parameter and 33.33% affected the availability rate parameter. The most effective action plan in improving the OEE value after maintenance was the acid cleaning process.
Downloads
References
Mesra T., Fitra., Hafrida, E., Ferdiansyah, F., (2023), “Overall Equipment Effectiveness Di Desalination Plant 2 Pada PT. Sari Dumai”. Program Studi Teknik Industri, Sekolah Tinggi Teknologi Dumai.
Ghernaout D., Elboughdiri., (2020), “Desalination in the Context of Water Scarcity Crisis: Dares & Perspectives”, Chemical Engineering Department, College of Engineering, University of Ha`il, Ha`il, KSA.
Titah H., Ersa G., (2020), “Kajian Alternatif Teknologi Desalinasi Dalam Produksi Air Tawar Untuk Desa Labuan Bajo, NTT”. Departemen Teknik Lingkungan, Fakultas Teknik Sipil Lingkungan dan Kebumian, Institut Teknologi Sepuluh Nopember, Surabaya.
Yaqin, R. I., Zamri, Siahaan, J. P., Priharanto, Y. E., Alirejo, M., Umar, M. L. (2020). “Pendekatan FMEA dalam Analisa Risiko Perawatan Sistem Bahan Bakar Mesin Induk: Studi Kasus di KM. Sidomulyo”. Jurnal Rekayasa Sistem Industri, 9(3), 189-200.
Aryanto T., Susianti H., Dewita E., Alimah S., (2019), “Review Teknologi Desalinasi Yang Dikopling Reaktor Daya Eksperimental”. Departemen Teknik Kimia, Universitas Gadjah Mada, Yogyakarta.
Fitriadi, Muzakir, Suhardi. (2019), ” Integrasi Overall Equipment Effectiveness (OEE) dan Failure Mode And Effect Analysis (FMEA) Untuk Meningkatkan Efektifitas Mesin Screw Press Di PT. Beurata Subur Persada Kabupaten Naga Raya”. Jurusan Teknik Industri, Fakultas Teknik, Universitas Teuku Umar.
Jutika B., Suherman A., (2019), “Pengendalian Kualitas Dengan Metode Failure Mode Effect And Analysis (FMEA) Dan Pendekatan Kaizen Untuk Mengurangi Jumlah Kecatatan Dan Penyebabnya”. Jurusan Teknik Industri, Institut Sains Dan Teknologi Al-Kamal, Jakarta Barat.
Mobley, R Keith. 2008. Maintenance Engineering Handbook 7th Edition. New York. Mc Graw Hill Book Company.
Nakajima, S. (1998). Introduction to “TPM Total Productive Maintenance”. Cambridge: Productivity Press, Inc.
