Analisa Produktivitas Produksi Gula di PG. Gempolkrep dengan Metode Omax dan RCA (Rootcause Analysis)

Krisna Agung Santoso; Erni Pupanantasari Putri

doi:10.37859/jst.v11i1.7069

Authors

Krisna Agung Santoso Universitas 17 Agustus 1945 Surabaya
Erni Pupanantasari Putri Universitas 17 Agustus 1945 Surabaya

DOI:

https://doi.org/10.37859/jst.v11i1.7069

Keywords: Productivity, Omax, RCA, Fishbone Diagram

Abstract

Productivity is the spearhead of a company's survival, if there is an increase in productivity it shows the company's success in carrying out the production process. P.G. Gempolkrep Mojokerto is a sugar factory located in Gempolkrep Village, Gedeg District, Mojokerto Regency. The research aims to measure and analyze the causes of decreased productivity based on 3 criteria, namely Raw Materials, Labor, Machine Hours, Electrical Energy and Sugarcane Yield. The method in this research uses the Objective Matrix Method (OMAX) with stages of Determining Criteria (Defining), Measuring Criteria (Quantifying) and Productivity Index Analysis (Monitoring). On 1 - 15 August 2023, productivity was the best with a productivity index of 1,000, while the lowest productivity occurred on 16 - 31 May 2023, amounting to 30.30. On 16 - 31 July 2023, the overall productivity level was the best with a change index to standard productivity of 192%. Meanwhile, the worst Overall Productivity occurred on 1 - 15 September 2023, amounting to - 45.4%.

Downloads

Download data is not yet available.

Author Biographies

Krisna Agung Santoso, Universitas 17 Agustus 1945 Surabaya

Jurusan Teknik Industri

Erni Pupanantasari Putri, Universitas 17 Agustus 1945 Surabaya

Jurusan Teknik Industri

References

Setiowati, R. (2017). Analisis pengukuran produktivitas departemen produksi dengan metode Objective Matrix (OMAX) pada CV. Jaya Mandiri, vol, 10, no. 3, pp. 199-209.

Rahmatullah, S., Katili, P. B., & Wahyuni, N. (2017). Analisa produktivitas pada divisi produksi PT. XYZ menggunakan metode Objective Matrix (OMAX). Jurnal Teknik Industri Untirta, vol. 19, no. 2, pp. 51-68.

Sudiman, S., & Fahrudin, W. A. (2021). Perancangan Efektivitas dan Efisiensi untuk Peningkatan Produktivitas Lini Produksi Wellhead dengan Metode Objective Matrix. Jurnal INTECH Teknik Industri Universitas Serang Raya, vol. 7, no. 1, pp. 15-22

Wibisono, D. (2019). Analisis produktivitas dengan menggunakan pendekatan Metode Objective Matrix (OMAX) studi kasus di PT. XYZ. Jurnal Optimasi Teknik Industri (JOTI), vol. 1, no. 1, pp. 1-7.

A.Vandy Pramujaya, D. A. K. (2019). Analisis Penyebab Kegagalan Packer Machine Pada Bag Transfer System Dengan Menggunakan Metode Fault Tree Analysis (FTA), Failure Mode And Effect Analysis (FMEA), dan Fishbone Analysis. 125–132