MODIFIKASI DONGKRAK ULIR BOTOL MENGGUNAKAN MOTOR LISTRIK

  • Syaiful Islami Universitas Muhammadiyah Riau
  • Muhammad Ridha Fauzi Universitas Muhammadiyah Riau
Keywords: modification, bottle screw jack, DC motor, Mitsubishi Colt T

Abstract

The jack is the main equipment that must be present when driving a car. The presence of a jack is very important in the event of a tire leak or other damage that requires the jack to be operated. The operation of the jack is very difficult if the operator is an elderly person, a disabled person or a woman. Therefore, it is necessary to modify the mechanical jack into an easier electric jack. The purpose of this study was to modify a manual bottle screw jack into an electric jack to make it easier for the operator or driver if the car needs to be lifted using a jack. The modified jack is a type of bottle screw jack using an electric motor. The modification of the jack is done using a DC motor as the main driver to replace human power and other components. The load test was carried out using a Mitsubishi Colt T with a weight of 1000 Kg. The results show that the modified jack helps to reduce the difficulty in operation, reduce time, increase efficiency.

Downloads

Download data is not yet available.

References

[1] Mohamad Nurhasim, Modifikasi Dongkrak Hidrolik Botol Menjadi Dongkrak Hidrolik Elektrik dengan Aki Mobil sebagai Sumber Arusnya. Simki-Techsain. 2017, Vol. 01 No. 03: Hal. 1-11.
[2] Ozzy Firdaus Subarkhah, Rancang Bangun Mesin Dongkrak Hidrolik Dengan Bantalan Luncur Serta Sistem Elektriknya. Tugas Akhir. Universitas 17 Agustus 1945, Surabaya. 2020.
[3] Ignatio Madanhire, Tapiwa Chatindo, Development of a Portable Motorized Car Jack, Proceedings of the International Conference on Industrial Engineering and Operations Management. Pilsen, Czech Republic. July 23-26, 2019: 1746 – 1753.
[4] A. S. Akinwonmi and A. Mohammed, Modification of the Existing Design of a Car Jack. Journal of Emerging Trends in Engineering and Applied Sciences (JETEAS). [5] Choudhary S, Ravi Kumar D, Pasbola D and Dabral S, Development of Motorized Car Jack. Journal of Applied Mechanical Engineering. 2016. Volume 5, Issue 4 : pp. 1-4.
[5] Choudhary S, Ravi Kumar D, Pasbola D and Dabral S, Development of Motorized Car Jack. Journal of Applied Mechanical Engineering. 2016. Volume 5, Issue 4 : pp. 1-4.
[6] Rizky Ramadan, Rancang Bangun Modifikasi Hydraulic Jack Manual Menjadi Elctric. JRM. 2018,Vol. 04 No. 03: Hal. 63 – 69.
[7] Faisal, Modifikasi Dongkrak Tabung Menjadi Dongkrak Buaya. Tugas Akhir. Universitas Tridinanti Palembang. 2020.
Published
2022-07-14
Abstract views: 74 , *.pdf downloads: 66