Minimalisasi Waste Industri Furniture Pada Produksi Rak Botol

  • Marulan Andivas Universitas Balikpapan
  • Dimaz Harits Universitas Balikpapan
  • Alex Kisanjani Universitas Balikpapan
Keywords: Value Stream Mapping, Fishbone Diagram, Current state mapping

Abstract

Indonesian furniture products are known to have high competitiveness in the international market. This competitiveness is in the form of unique designs and furniture products with distinctive raw materials such as rattan, bamboo, and teak compared to furniture produced by other countries. PT. XYZ is a company engaged in manufacturing (Furniture). In this study, we will observe the production process of bottle racks ordered by consumers as many as 150 pcs. Based on observations, in the process the company shows that there are activities that do not provide added value resulting in delays in the delivery of ordered products. To find out the cause of the problem, the researcher uses one of the tools from lean manufacturing (Value Stream Mapping) to find waste. Fishbone diagrams in this study were used to help solve the problems found, so that to complete the previous product order which took 44.6 days, it could be completed in 23 days.

Downloads

Download data is not yet available.

References

Titi Kurnia Fitriati, dkk. (2021). Entrepreneurial orientation and SME performance: Dynamic capabilities as meditation study on SMEs in Indonesia. In International Conference on Humanities Education, and Social Sciences, KnE Social Sciences, hal. 74-89. DOI 10.18502/kss.v4i14.7860

Dewi Kurniawati & Henry Yuliando. (2015). Productivity improvement of small scale medium enterprises (SMEs) on food product: Case at Yogyakarta Province, Indonesia. Agriculture and agricultural sciences procedia, vol.4, hal. 189 – 195.

Bhasin, B. B., & Venkataramany, S.(2010). Globalization of enterpreneurship: Policy considerations for SME development in Indonesia. International business and economic research journal, vol.9, no.4.

Irjayanti, M., & Aziz, A. M., (2012). Barrier factors and potential solutions for Indonesia SMEs. Procedia economics and finance, vol. 4, hal. 3 – 12.

David Dwi Harjanto & Putu Dana Karningsih.(2021). Pengembangan dimensi dan indikator lean assessment tools untuk UMKM di Indonesia. Prozima, vol.4, no. 1, hal. 21-29.

Deskhar, A., dkk.(2018). Design and evaluation of a lean manufacturing framework using value stream mapping (VSM) for a plastic bag manufacturing unit. Materialstoday: Proceedings, vol. 5, no.2, hal. 7668 – 7677.

Dimaz Harits, dkk.(2021). The analysis of waste activities in supramak bed production by using value stream mapping and VALSAT approaches. Journa of industrial engineering management, special editian of seminar nasional teknik dan manajemen industri 2020.

P. Studi Manajemen, N. Baldah, and H. Amaruddin, “Pendekatan Value Stream Mapping Pada Optimalisasi Proses Dan Peningkatan Produktivitas,” Mak. J. Manaj., vol. 7, no. 2, pp. 136–144, Dec. 2021, Accessed: Jan. 19, 2022. [Online]. Available: https://www.maker.ac.id/index.php/maker/article/view/342.

C. Scheuer et al., “Desain Perbaikan Untuk Meningkatkan Nilai Efisiensi Manufaktur Keberlanjutan Menggunakan Sustainable Value Stream Mapping (Studi Kasus : CV Mugiharjo),” Ind. Eng. Online J., vol. 7, no. 4, pp. 343–354, Jan. 2019, doi: 10.2/JQUERY.MIN.JS.

N. Muflihah, “Implementasi Lean Manufacture Dengan Metode Vsm Untuk Mengurangi Waste Pada Proses Produksi Kapal (Studi Kasus PT. PAL Divisi Kaprang),” Reaktom Rekayasa Keteknikan dan Optimasi, vol. 2, no. 1, 2017, doi: 10.33752/reaktom.v2i1.150

A. A. Nashida and Y. Syahrullah, “Perbaikan Kualitas Pada Proses Produksi Kabel Type NYA dengan Metode Quality Control Circle (QCC) Pada Perusahaan Manufaktur Kabel di Banyumas,” JURMATIS J. Manaj. Teknol. dan Tek. Ind., vol. 3, no. 2, pp. 147–160, Jul. 2021, doi: 10.30737/JURMATIS.V3I2.1792.G1660

Published
2022-01-02
Abstract views: 113 , pdf downloads: 72