Pendekatan Terintegrasi OEE dan FMEA dalam Meningkatkan Keandalan Mesin Giling Kedelai pada Proses Produksi Tahu
DOI:
https://doi.org/10.37859/jst.v12i2.10442
Abstract
This study explores the enhancement of soybean grinding machine reliability in tofu production by integrating Overall Equipment Effectiveness (OEE) and Failure Mode and Effects Analysis (FMEA). Conducted at CV. Restu Mulia Jaya between November 2024 and April 2025, the research utilized quantitative analysis of machine operational data. The findings revealed consistently low OEE values (39.04%–46.03%), attributed primarily to frequent downtime and variable performance rates. Equipment failures and speed losses were identified as the main sources of inefficiency. FMEA highlighted critical failure modes, notably clogged or corroded spirals and damaged filters. Recommended improvements include the adoption of Total Productive Maintenance (TPM), operator training, real-time monitoring, and the use of durable materials for key components. This integrated OEE-FMEA approach effectively prioritizes corrective actions and supports sustainable reliability improvement for soybean grinding machines in small-scale tofu production.
Keywords: machine reliability, OEE, FMEA, tofu production, maintenance
Downloads
References
T. Pratomo, M. Muharom, N. Kholili, A. Nugroho, M. Muchid, and D. Khusna, “Efforts To Increase Tempe Slicing Capacity Through The Implementation Of Appropriate Technology Machines For MSMEs In West Surabaya,” Pengabdian Masyarakat dan Inovasi Teknologi (DIMASTEK), vol. 2, no. 01, pp. 66–71, 2023.
Q. Maulana, S. Sugeng, and H. P. Turnip, “Optimization Strategy to Reduce Unplanned Low Power Engine Breakdowns on PC-2000 Units at PT Antareja Mahada Makmur,” Jurnal Syntax Transformation, vol. 5, no. 12, pp. 1376–1381, 2024.
C. Sierra and E. Andrea, “Optimizing Standby Equipment Levels,” in Mining Maintenance, Springer, 2024, pp. 231–255.
A. Magrini, “The New Era of Preventive Maintenance: Benefits of Predictive Analytics in Feed Mills,” Available at SSRN 5016966, 2024.
B. Á. Ádám and Z. Sebestyén, “Comparison of OEE-based manufacturing productivity metrics,” in Creative Construction Conference 2023, 2023, pp. 432–439.
F. Kechaou, S.-A. Addouche, and M. Zolghadri, “A comparative study of overall equipment effectiveness measurement systems,” Production Planning & Control, vol. 35, no. 1, pp. 1–20, 2024.
D. D. Silveira and J. J. de O. Andrade, “Application of OEE for productivity analysis: a case study of a production line from the pulp and paper industry,” Dyna (Medellin), vol. 86, no. 211, pp. 9–16, 2019.
J. D. Morales Méndez and R. S. Rodriguez, “Total productive maintenance (TPM) as a tool for improving productivity: a case study of application in the bottleneck of an auto-parts machining line,” The International Journal of Advanced Manufacturing Technology, vol. 92, no. 1, pp. 1013–1026, 2017.
F. A. Tonny, A. Maliha, M. I. Chayan, and M. D. Xames, “Optimization of overall equipment effectiveness (OEE) factors: Case study of a vegetable oil manufacturing company,” Manag. Sci. Lett, vol. 13, no. 2, pp. 124–135, 2023.
D. D. Silveira and J. J. de O. Andrade, “Application of OEE for productivity analysis: a case study of a production line from the pulp and paper industry,” Dyna (Medellin), vol. 86, no. 211, pp. 9–16, 2019.
L. S. T. Lestari and P. J. Ginting, “Analisis Perawatan Mesin Dengan Menggunakan Metode Failure Modes And Effects Analysis (FMEA):(Studi Kasus: PT. Bukit Barisan Transport),” Jurnal Teknologi dan Manajemen Industri Terapan, vol. 4, no. 3, pp. 285–834, 2025.
A. D. Aryani, W. Wahyuda, and S. Gunawan, “Analysis and determination of tofu production risk mitigation strategy using FMEA and AHP methods (Case study: UD XYZ),” Teknika: Jurnal Sains Dan Teknologi, vol. 18, no. 1, pp. 77–85, 2022.
R. Bharsakade, P. Badgujar, K. Malani, S. Rithe, and P. Salunke, “Quality and Efficiency Improvement Through Process FMEA—A Case Study,” in Advances in Modelling and Optimization of Manufacturing and Industrial Systems: Select Proceedings of CIMS 2021, Springer, 2023, pp. 375–391.
F. A. S. Piran, A. De Paris, D. P. Lacerda, L. F. R. Camargo, R. Serrano, and R. A. Cassel, “Overall equipment effectiveness: Required but not enough—An analysis integrating overall equipment effect and data envelopment analysis,” Global Journal of Flexible Systems Management, vol. 21, no. 2, pp. 191–206, 2020.
H. Soltanali, M. Khojastehpour, J. E. De Almeida e Pais, and J. T. Farinha, “Sustainable food production: an intelligent fault diagnosis framework for analyzing the risk of critical processes. Sustainability 2022; 14: 1083,” 2022, s Note: MDPI stays neutral with regard to jurisdictional claims in published ….
N. Rahmawati, M. Aldiansyah, E. Yuliawati, and D. Trihastuti, “Application of Overall Equipment Effectiveness and Failure Mode Efffect and Criticality Analysis Methods to Improve Machine Performance Effectiveness,” Tibuana, vol. 6, no. 2, pp. 89–97, 2023.
C. N. Achebe, S. C. Nwanya, and S. O. Enibe, “Process capacity improvement by equipment and operations control ratios in de-husking lines of small-scale rice processing factories,” Nigerian Journal of Technology, vol. 43, no. 2, pp. 253–260, 2024.
A. B. Aditya, B. Nugroho, H. Hermantoro, and R. A. Renjani, “Enhancing Reliability and Maintenance Efficiency of Screw Press Machines in Palm Fruitlet Processing Mills: A Failure Mode and Effect Analysis (FEMA) Approach,” Tropical Plantation Journal, vol. 4, no. 2, pp. 30–39, 2025.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2025 Poniman poniman, Akmal Musa , Andika Cahyono Putra
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
