Perancangan Sistem Penyiraman Otomatis Arduino Uno di Badan Pusat Statistik Kota Gunungsitoli
DOI:
https://doi.org/10.37859/jf.v15i2.9572
Abstract
Teknologi otomasi menjadi solusi strategis dalam mengoptimalkan efisiensi kegiatan rutin, salah satunya dalam hal perawatan tanaman. Penelitian ini bertujuan untuk merancang dan mengimplementasikan sistem penyiraman otomatis berbasis Arduino Uno dan sensorkelembaban tanah FC-28 yang diterapkan pada area taman di lingkungan Badan Pusat Statistik (BPS) Kota Gunungsitoli. Sistem ini dirancang untuk mendeteksi tingkat kelembaban tanah secara nyata (real-time) dan mengaktifkan pompa air mini secara otomatis apabila kondisi tanah terdeteksi kering berdasarkan ambang batas tertentu. Metode yang digunakan adalah eksperimen langsung melalui perakitan komponen elektronik, pemrograman mikrokontroler, dan pengujian lapangan selama satu bulan. Hasil menunjukkan bahwa sistem mampu mengurangi penggunaan air hingga 40% dibandingkan metode penyiraman manual serta bekerja secara stabil tanpa intervensi pengguna. Sistem ini merupakan solusi teknologi tepat guna yang murah, efisien, dan layak untuk direplikasi pada lingkungan kerja berskala kecil maupun rumah tangga.
Downloads
References
W. Warji, S. Suharyatun, A. Tusi, and A. B. Soma, “Development of a Prototype Automatic Irrigation System Using Arduino Uno for Enhanced Soil Moisture Management,” Int. J. Des. Nat. Ecodynamics, vol. 19, no. 5, pp. 1519–1526, 2024, doi: 10.18280/ijdne.190506.
M. A. Ranasariya, M. Anzar Khan, and M. P. Yadav, “International Journal of Research Publication and Reviews Smart Parking System,” Int. J. Res. Publ. Rev., no. 6, pp. 8194–8197, 2025, [Online]. Available: www.ijrpr.com
M. Mashuri, “Smart Urban Farming Based on Internet of Things Using Soil Moisture Control and Application of Liquid Fertilizer to Mustard,” IPTEK J. Eng., vol. 9, no. 3, p. 88, 2023, doi: 10.12962/j23378557.v9i3.a18446.
P. K. Rajani et al., “IoT-Based Low-Cost Soil Moisture and Soil Temperature Monitoring System,” SSRG Int. J. Electr. Electron. Eng., vol. 10, no. 10, pp. 66–74, 2023, doi: 10.14445/23488379/IJEEE-V10I10P108.
R. A. Anugrah, R. R. Sika, Sunardi, and T. Marcell, “An Automatic Watering System Based on an Arduino Microcontroller and Soil Moisture Sensors with Solar Panel Power Plant,” BIO Web Conf., vol. 144, pp. 1–12, 2024, doi: 10.1051/bioconf/202414402003.
A. N. Samanta, M. Halder, T. Dhank, S. Roy, and G. K. Das, “Auto Irrigation System Using an Arduino Uno and Soil Moisture Sensor,” Am. J. Adv. Comput., vol. 2, no. 2, pp. 1–6, 2023, doi: 10.15864/ajac.22001.
“Soil Moisture Sensor - Arduino Tutorial.” Accessed: Jul. 25, 2025. [Online]. Available: https://www.circuits-diy.com/soil-moisture-sensor-arduino-tutorial/
A. Rosadi, A. Fauzan, and Winarno, “Prototype design of automatic plant watering equipment with soil moisture detection system based on arduino uno microcontroller: Case study of chili plant,” J. Phys. Conf. Ser., vol. 1517, no. 1, 2020, doi: 10.1088/1742-6596/1517/1/012077.
V. Anand, “Performance of Induction Motor and BLDC Motor and Design of Induction Motor driven Solar Electric Vehicle (IM-SEV),” Int. J. Adv. Res. Sci. Commun. Technol., vol. 6, no. 1, pp. 1046–1053, 2021, doi: 10.48175/568.
“Soil Moisture Sensor with Arduino- Smart Plant Watering Project.” Accessed: Jul. 25, 2025. [Online]. Available: https://www.etechnophiles.com/soil-moisture-sensor-with-arduino/
Downloads
Published
Issue
Section
License
Copyright (c) 2025 Fober, Serius, Lustantri, Santi, Ofelius
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Copyright Notice
An author who publishes in the Jurnal FASILKOM (teknologi inFormASi dan ILmu KOMputer) agrees to the following terms:
- Author retains the copyright and grants the journal the right of first publication of the work simultaneously licensed under the Creative Commons Attribution-ShareAlike 4.0 License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal
- Author is able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book) with the acknowledgement of its initial publication in this journal.
- Author is permitted and encouraged to post his/her work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of the published work (See The Effect of Open Access).
Read more about the Creative Commons Attribution-ShareAlike 4.0 Licence here: https://creativecommons.org/licenses/by-sa/4.0/.
_(1).png)
