Penerapan Logika Fuzzy Sugeno Untuk Optimasi Kualitas Tempe Pada Proses Fermentasi

  • Arfani Rahman Sari UIN Sumatera Utara
  • Sriani UIN Sumatera Utara
https://doi.org/10.37859/jf.v13i3.5942
Keywords: fuzzy logic, sugeno, optimization, tempe, MAPE

Abstract

Determining the amount of tempeh production can be done by industries or businesses that process soybeans into tempeh, which is a source of nutrition and food for the Indonesian people. Apart from being easy to get, tempeh is also one of the favorite foods among all groups. In producing tempeh, it is certain that the tempeh manufacturing industry also carries out a fermentation process every day to produce a lot of tempeh, apart from that, the process requires maximum manufacturing so that the quality of the tempeh is maintained until it reaches consumers. However, if it is not optimal, the quality of tempeh and the entrepreneur will lose profits. Therefore, tempeh quality was optimized. In order to reduce the impact of poor quality during the manufacturing process, it is necessary to calculate the prediction factors for the impact of poor quality, namely by using the Sugeno fuzzy logic method. Where fuzzy can be relative and can provide solutions to problems encountered in the production process. Optimizing the quality of tempeh from several variables can be determined by a MAPE value of 7.02% according to the predicted value table of 7.02% and this includes good research and is very efficient. Based on these problems, the author models an application system built with Matlab software.

Downloads

Download data is not yet available.

References

[1] Anggraini, T. N., Samosir, R. A., Saputri, E. C., & Windarto, A. P. 2020. Fuzzy Inferensi System Pada Produksi Tempe Dengan Algoritma Tsukamoto. SeminarNasional Teknologi Komputer & Sains (SAINTEKS), pp.292-296.
[2] Alvina, A., Hamdani, D., & Jumiono, A. 2019. Proses Pembuatan Tempe Tradisional. Jurnal Pangan Halal, 1(1), pp.9-12.
[3] Apriyanto, M., Fangohoi, L., Aprilia, V., Diba, D. F., Prayitno, S. H., Nurhayati, N., et al. 2021. Pangan Berbasis Fermentasi. Yogyakarta: Nuta Media
[4] Akmalia, D., Furqon, I. K., & Mutmainah, I. 2022. Proses Produksi Tempe Ditinjau Dari Ekonomi Islam. Sahmiyyah, 1(1), pp. 113-123.
[5] Irnanda, K. F., Windarto, A. P., & Damanik, I. S. 2022. Optimasi Prticle Swarm Optimization Pada Peningkatan Prediksi dengan Metode Backpropagation Menggunakan Software rapidMiner. JURIKOM ( Jutrnal Riset Komputer), 9(1) pp.122-130.
[6] Surbakti, A. B., Rahayu, S. P., BR PA, S. M., & Ginting, R. B. 2020. Sistem Aplikasi Logika Fuzzy Untuk Penentuan Optimasi Ragi Tempe Pada Proses Fermentasi tempe Kedelai Menggunakan Metode Fuzzy Mamdani. Ilmiah SIMANTEK, 4(2), pp.146-160.
[7] Tjolleng, A. 2017. Pengantar Pemograman MATLAB. Jakarta : Elex Media Komputindo.
[8] Kusumadewi, S., & Purnomo, H. 2010. Aplikasi Logika Fuzzy untuk Pendukung Keputusan. Yogyakarta: Graha Ilmu.
[9] Nurdini, S., Nurcahyo, G. W., & Santony, J. 2021. Analisis Perkiraan Jumlah Produksi Tahu Menggunakan Metode Fuzzy Sugeno. Sistem Informasi dan teknologi, 3(1), pp.18-23.
[10] T, S., Mulyanto, E., & Suharto, V. 2011. Kecerdasan Buatan. Yogyakarta: Andi Offset.
[11] Basriati, S., Safitri, E., & Nofridayani, P. 2020. Penerapan Metode fuzzy Tsukamoto dalam Menentukan Jumlah Produksi Tahu. Sains Teknologi dan Industri , 18(1), pp.120-125.
Published
2023-12-23
Issue
Vol 13 No 3 (2023): Jurnal FASILKOM (teknologi inFormASi dan ILmu KOMputer)
Section
Articles

Copyright (c) 2023 Arfani Rahman Sari, Sriani (Author)

Creative Commons License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Copyright Notice

An author who publishes in the Jurnal FASILKOM (teknologi inFormASi dan ILmu KOMputer) agrees to the following terms:

  • Author retains the copyright and grants the journal the right of first publication of the work simultaneously licensed under the Creative Commons Attribution-ShareAlike 4.0 License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal
  • Author is able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book) with the acknowledgement of its initial publication in this journal.
  • Author is  permitted and encouraged to post his/her  work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of the published work (See The Effect of Open Access).

Read more about the Creative Commons Attribution-ShareAlike 4.0 Licence here: https://creativecommons.org/licenses/by-sa/4.0/.

Abstract views: 82 , Pdf downloads: 71